Clinical Chemistry Analyzer  is a new concept designed clinical chemistry analyzing system for biochemical research and clinical diagnostics:

Features
•    Photometric scanning of Spectrum, Analysis in multiple longitude of wave and kinetics, endpoint, fixed time, kinetic. Blank of water or blank of reagent method can be linear or nonlinear, according to the type of reagent you are using.
•    Diagnosis of Operation
•    Automatic Calibration
•    System of aspiration of sample (Pale of flow, Aspiration System, Faslk of Residuals, Tubes, Connectors, etc)
•    Power Cable included
•    Works with WindowsCE operating system. Single chip machine, does not require Windows XP or Windows 7
•    Enzyme Kinetic GPT GOT tests

Multi-element chemical composition analysis in seconds 
Do you need non-destructive analysis of chemical composition in seconds because of time-critical process control or running sample high-throughputs? 
With up to 28 elements measured simultaneously in concentration ranges from ppm to 100%, this is the ideal solution. Accurate and robust analysis, ease of operation by less-experienced staff and high uptime go hand in hand with a low cost of ownership.
Fast results in time-critical applications
With analysis results being available in just a few seconds, this is the ideal tool for time-critical applications and high sample throughput analysis environments. Main application areas include steel and metals alloy production as well as geological or commercial laboratories where hundreds of samples need to be analyzed every day. 

Designed with the analyst in mind: making routine analysis convenient with innovative “ClickTek” technology – “Install capillary columns & change liners without using any tools”
•    World’s highest FID sensitivity 1.2 pgC/s (dodecane)
•    Enhanced sensitivity for all detectors to support wide range of challenging applications
•    Wide Range of Injectors, like Split/Splitless; PTV; OCI, WBI (Direct Injection) for complete analytical flexibility
•    Excellent reproducibility with intelligent automatic flow controller
•    Fast GC capability using Hydrogen as a carrier gas and suitable even for ultra-narrow bore columns up to 0.05mm id.
•    Unique advanced functions improves energy efficiency and reduces operating cost
•    Easy transfer of existing methods with flexible injection modes

•    Biocompatible HPLC system offering the same superior reliability, robustness, and expandability.
•    It is well suited to the analysis of protein-based pharmaceuticals, antibody drugs, and other substances related to biotechnologies, genetic engineering, cell fusion, and cell culturing.
•    Compatible with mobile phases containing high concentrations of salts or acids typically used for analyzing antibody drugs and membrane proteins.
•    Its low surface activity inhibits peak tailing experienced on traditional UHPLC systems. 
•    Such tailing can be especially problematic when analyzing phosphorylated peptides, which have a high affinity for metals. 

Centrifugation is a separation technique by which particles of different shape,size and density are separated based upon their sedimentation rate by spinning under the influence of centrifugal force.(extra gravitational force) 
The instrument used to hold the sample and generate the centrifugal force is called as centrifuge.centrifuge is made up of rotor. 
A rotor can hold the samle tube and spin along its own axis at different speeds to generate centrifugal force.

DESCRIPTION:

New digital photoelectric colorimeter AE-30F of the Japanese company ERMA is an easy-to-use, compact device that provides high accuracy and repeatability of measurements at a low price.

Distinctive features:

• Direct reading of concentration from a digital display eliminates the need for plotting curves.
• glass filters for long-term use make it possible to perform analyzes with high accuracy even during routine measurements;
• small volume of test for measurement: 1 ml.

Measured parameters:

Clinical chemistry tests, of any manufacturers of an open type, measured by optical density, only by the "end point" method:

Highly versatile particle counting and characterization system.
It uses the principle to detect particles via electrical zone sensing, regardless of the particle’s nature or optical properties. This makes it an ideal tool for detecting and counting a wide variety of particles, such as:
•    Mammalian cells
•    Bacteria
•    Yeast
•    Abrasives
•    Toner particles
•    Cell aggregates
•    Spheroids
•    Large protein aggregates

Provides the performance you need in an easy to use system allowing you to focus on the science, not the instrumentation. Its superior sensitivity and resolution throughout all configurations give it the edge over other cytometry systems four times its size.
•    Fully activated with 13 colors or as few as four, activate additional channels in the future
•    Includes 13 band pass filters: 450/45, 525/40 (2), 585/42, 610/20 (2), 660/10 (2), 690/50, 712/25, 780/60 (3)
•    For higher throughput applications an optional plate loader module is available and for use in regulated environments 

Liquid particle counting system designed for the real world. Easy to use with one-button sampling and results in under 60 seconds.
The system offers consistent, accurate fluid sampling from 1cST to 425 cSt without dilution. 
•    Intelligent on-screen prompts for common sampling activities
•    Fewer steps for higher throughput
•    Paperless option for application-specific reports
•    Online report review & approval

Specifically designed to help demonstrate compliance to the pharmacopoeial requirements for TOC and conductivity for Purified Water and Water For Injection.
•    TOC, Uncompensated Conductivity and Temperature from just one analyzer – can be fully calibrated and validated to USP<643> and USP<645>
•    Low cost of ownership – 12 month service and calibration intervals
•    Root-cause analysis support – water sample automatically taken if there is a TOC excursion
•    All SOPs are pre-loaded, leading users step-by step with on-screen pictures and prompts

A compact liquid handler ideal for smaller laboratories and those new to automation. It helps standardize daily pipetting routines, maintain sample quality and generate repeatable, reliable results. Labs focused on genomics, drug discovery, cell biology, proteomics, forensics, and related research can run methods on the Biomek 4000 automated liquid handler.
•    Ideal for low-throughput workflows
•    12 deck positions including 4 off-deck
•    1 - 1,000 µL pipetting volume range with liquid-level sensing
•    Multiple interchangeable single- and eight-channel pipetting tools and gripper

To obtain ultrapure water quality, tap water is purified to RiOs™ (Type 3) water: 
First, the Progard® cartridge provides a comprehensive pretreatment to extend the lifetime of the Reverse Osmosis (RO) membrane. 
Intelligent RO ensures the optimization of the water consumption, quality and a constant flow rate. 
Water is then irradiated by the optional bactericidal UV lamp. 
Depending on daily volume needs, different production flow rates are available (8 & 16 L/h).